Table 29 Displayed Information in Device Column for Remote Command Device
Displayed Information in Device ColumnStorage System
Format: Emulation Type + -CM
For example, OPEN-V-CM, OPEN-3-CM
Universal Storage Platform V
Universal Storage Platform VM
TagmaStore Universal Storage Platform
TagmaStore Network Storage Controller
Lightning 9900V series
SANRISE Universal Storage Platform
SANRISE Network Storage Controller
SANRISE9900V series
H24000
H20000
SANRISE H12000
SANRISE H10000
SANRISE H1024/H128
HP StorageWorks XP24000 Disk Array
HP StorageWorks XP20000 Disk Array
HP StorageWorks XP12000 Disk Array
HP StorageWorks XP10000 Disk Array
HP StorageWorks XP1024/XP128 Disk Array
DF600F-CMAdaptable Modular Storage
Workgroup Modular Storage
Thunder 9500V series
SANRISE9500V series
• If you access the remote command device from an OPEN host, the device information that is
reported by the remote command device is about the command device, which is mapped as
a remote command device, of the external storage system.
The device information about the command device that is reported to the host by the remote
command device includes the following:
◦ Serial number
◦ Vendor
◦ Device name
The device name that is reported to the host is same as the one displayed in the Device
column of the Volume Operation window. For the device name that is reported to the
host, see Table 29 (page 121).
• Even if the status of the remote command device is normal, an error may occur when the
operations or commands are performed on the remote command device.
If an error occurs even though the status of the remote command device is normal, check the
status of the command device of the external storage system, not the remote command device.
• Table 30 (page 122) shows restrictions for mapping a command device as a remote command
device.
Guidelines for Remote Command Devices 121
