GB46
User’s Manual
In this chapter you can con gure the installation setting and perform channel search. Menus such as
channel search, software update and default setting are included in this section.
Note:
• When you select Installation and press the OK button, you will be prompted to enter your password.
Enter the password to proceed.
• Press the EXIT button to save the changes and return to the previous menu. Press the MENU button to
exit the menu screen.
Tip: The default password is 0000.
9.1 Channel Search
1. Press the MENU button.
2. Select Installation using the / button and
press the OK button.
3. Select Channel Search using the
/ button and
press the OK button.
4. Select Frequency and enter the frequency using
the NUMERIC(0~9) buttons.
5. Select Symbol Rate and press the OK and
/
button. If the required value is not available, select
User De ne and enter the symbol rate directly.
6. Select Network ID and enter the value using the
NUMERIC (0~9) buttons.
7. Select Search and press the OK button.
8. Please wait for nishing the channel search. If you
want to stop the channel search, press the OK
button.
9. Press the OK button to save the result.
9. Installation
