40
8
POCKET BEEP AND TONE SQUELCH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
i Push any key for the main band or any of the shared keys
below the display to exit tone squelch selection mode
.
o When a signal with a matching tone is received, the re-
ceiver emits beep tones and blinks “S.”
• Beep tones sound for 30 sec. and “S” blinks. To stop the
beeps and blinking manually, push any key.
!0 Push and hold [MONI•T/T-SCAN] for 1 sec. to enter tone
squelch selection mode, then rotate the main band’s
[DIAL] to cancel the tone squelch or DTCS squelch func-
tion.
• “oFF” is selected for turning the function OFF.
D Available tone frequency list
NOTE: The receiver has 51 tone frequencies and conse-
quently their spacing is narrow compared to units having
38 tones. Therefore, some tone frequencies may receive
interference from adjacent tone frequencies.
D Available DTCS code list
D Calling a waiting station using pocket beep
A subaudible tone matched with the station’s CTCSS tone fre-
quency or 3-digit DTCS code with the correct polarity is nec-
essary. Use the tone squelch on the next page (p. 41).
with tone squelch is activated.
with DTCS squelch is activated.
