74
ENGLISH
Press 5 (up) to select the
next service. (If a primary
service has some secondary
services, they are selected
before the next primary
service is selected.)
Press ∞ (down) to select the previous
service (either primary or secondary).
Press 5 (up) to select the next
service.
Press ∞ (down) to select the previous
service.
SRC
Storing DAB services in memory
You can preset up to 6 DAB services in each
DAB band (DAB1, DAB2, and DAB3) manually.
1
Select the DAB tuner.
1 Press SRC (source)
repeatedly to select the DAB
tuner.
2 Press and hold SRC. Each
time you press and hold the
button, the DAB band
changes as follows:
Notes:
• This receiver has three DAB bands (DAB1,
DAB2, DAB3). You can use any of them to tune
in to an ensemble.
• When using the remote controller, press and
hold FM (DAB). Each time you press the
button, the DAB tuner and the FM tuner is
selected alternately.
2
Tune in to an ensemble you want.
3
Select a service of the ensemble you
want to listen to.
Press ¢ to search
for ensembles of higher
frequency.
Press 4 to search for ensembles of
lower frequency.
2
Start searching for an ensemble.
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
3
Select a service (either primary or
secondary) you want to listen to.
To tune in to a particular ensemble
without searching
Before you start....
1 Press SRC repeatedly to select DAB tuner as
the source.
2 Press and hold SRC repeatedly to select the
DAB band (DAB1, DAB2, or DAB3).
3 Press ¢ or 4 repeatedly until the
ensemble you want is reached.
• If you hold down the button, the frequency
keeps changing until you release the button.
4 Press 5 (up) or ∞ (down) to select a service
(either primary or secondary) you want to
listen to.
DAB1
DAB2
DAB3
EN73-77DV5000[E]f.p65 03.3.23, 18:5874
