68
Previous
screen
In case lamp time reaches 2 000
hours
The LCD Projector will shut itself OFF and
the STATUS Code indication becomes “L-0”.
• The on-screen display urging you to
replace the lamp unit will be displayed for
five minutes after the power has been
turned on, the power will then automatically
go off and it will enter the standby mode.
Note
• To maintain the initial brightness and picture quality,
replace the lamp as soon as possible when the lamp
replacement display appears.
• The replacement display appears after approximately 1900
hours, as a indication that it is time for the lamp to be
replaced.
• The replacement display is, after all, only a guideline to
the time for lamp replacement and is not an assurance of
the lamp’s service life.
• The lamp could go out before the replacement display
appears, for such reasons as individual lamp
characteristics, or the usage conditions and usage
environment. We thus recommend that you keep a
replacement lamp on hand.
• Fluorescent lamps should be replaced by your retailer or
the JVC service center. A lamp replacement fee may be
charged in addition to the cost of the replacement lamp.
Lamp Replacement (To retailers)
Unless you change to a
new lamp, POWER will
be off 5 minutes later.
