47
Changing the VFP setting
The VFP (Video Fine Processor) function enables you to
adjust the picture character according to the type of
programming, picture tone or personal preferences.
+
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
+
0
+
0
+
0
+
0
+
3
+
0
+
0
USER 1
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
+
0
+
0
+
0
+
0
+
3
+
0
CHANNEL/ZOOM
VOLUMETV VOL
TV/VIDEO MUTING
VFP
TV RETURN
ENTER
ON
SCREEN
CHOICE
FM MODE
10
0
+10
100+
PTY SEARCH
DVD
RDS
TA/NEWS/INFO
PTY( PTY9
RDS DISPLAY
ADJUST
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
7 During playback
1 Press VFP.
The VFP setting screen appears on the TV.
Ex.: When “NORMAL” is selected.
2 Press Cursor 3/2 repeatedly to select the
VFP mode.
Each time you press the button, the VFP mode changes
as follow.
NORMAL “ CINEMA “ USER 1 “ USER 2 “
(back to the beginning)
NORMAL :Normally, select this.
CINEMA :Suitable for a movie source.
USER 1, USER 2 :You can adjust parameters
affecting the appearance of
picture and also store the
settings (see the right).
To erase the VFP setting screen
Press VFP.
NOTE:
You cannot adjust the picture appearance when selecting “NORMAL”
and “CINEMA.”
7 To adjust the appearance of picture
When selecting “USER 1” or “USER 2,” you can adjust the
appearance of picture.
1 Press VFP, then press Cursor 3/2
repeatedly to select “USER 1” or “USER 2.”
2 Press Cursor ∞/5 repeatedly to select a
parameter you want to adjust.
Adjust the parameters so the picture you are viewing
appears as the way you prefer.
•GAMMA:
Adjust this if the neutral color is bright or dark. The
brightness of dark and bright portion is maintained.
Available range: –4 (darkest) to +4 (brightest)
•BRIGHTNESS:
Adjust this if the picture is bright or dark on the whole.
Available range: –16 (darkest) to +16 (brightest)
•CONTRAST:
Adjust this if the far and near position is unnatural.
Available range: –16 to +16
•SATURATION:
Adjust this if the picture is whitish or blackish.
Available range: –16 (most blackish) to +16 (whitest).
•TINT:
Adjust this if the human skin color is unnatural.
Available range: –16 to +16
•SHARPNESS:
Adjust this if the picture is indistinct.
Available range: +0 to +3
•Y DELAY:
Adjust this if the picture looks separately/overlapped.
Available range: –2 to +2.
3 Press ENTER.
VFP parameters list disappears, and the following pop-up
window for the selected item appears on the TV.
4 Press Cursor ∞/5 repeatedly to change the
setting, then ENTER.
Your adjustment is stored and the current VFP parameters
list appear again.
5 Repeat steps 2—4 to adjust other
parameters.
To erase the VFP setting screen
Press VFP.
To activate your setting
Press VFP, then press Cursor 3/2 repeatedly to select
“USER 1” or “USER 2.”
NOTE:
The VFP setting screen disappear if no operation is done for more
than 10 seconds.
Set the remote
control mode
selector to “DVD.”
EN37-49.TH-A75R[B]_f 02.9.5, 4:13 PM47
