(Continued)
■ Setting the time
After step 7, described in the “Setting the date” section
8 Set the “hour” using the jog dial.
● When you turn the jog dial and let go, the hour will change
up or down by one. When you turn and hold it, the hour will
change continuously.
● The clock uses the 12-hour system. Pay attention to the AM
or PM indicator in the display.
AM 0:00 → midnight, PM 0:00 → noon
9 Press the ENTER button to set the “hour”.
10Adjust the “minute” using the jog dial.
11Press the ENTER button to set the “minute”.
● When the ENTER button is pressed, the clock will show the
correct time.
Checking the date and time
After pressing the TIMER button, turn the jog dial until the date
and time are displayed.
Resetting the date and time
See “Setting the clock”.
● Once you have set the date and time, “TIME ADJUST” will
not be displayed in step 2. Turn the jog dial to make the date
and time appear.
● If you do not need to change the settings, just press the
ENTER button without turning the jog dial again.
DELETE/CLEAR
TIMER
ENTER
DATE
CLOCK
DATE
CLOCK
DATE
CLOCK
DATE
CLOCK
8
9
10
11
PM
PM
PM
PM
MD-R2
9
