RD-VH7/X-VH7 (EN)
Recording onto cassette tape
41
To stop playback
To reduce tape noise
(Dolby NR)
Transport direction indicators
The “2 reverse” and “3 forward” indicators in-
dicate the current direction in which the tape ad-
vances when playback or recording is started au-
tomatically by the easy operation function, etc.
This direction is the direction stored in memory
when the tape was last stopped.
Transport direction indicators
“”” lit ..... The two sides of tape will be
played back endlessly.
Goes off..... Tape stops after having played a
single side.
Selection of reverse mode
“B-type” lit ... Tape is played using B Type.
“C-type” lit ... Tape is played using C Type.
Goes off.........Dolby NR is deactivated.
Each press switch the modes as follows.
To wind tape at high speed
3 Fast-forward
÷ Press the “7 stop” key to stop fast winding.
To pause the tape
÷ Press the “2 rev” or “3 fwd” key to restart play-
back.
÷ The tape direction lights red.
The Dolby Noise Reduction system reduces in-
herent noise to tape playback. This cassette deck
incorporates the C Type Dolby NR in addition to
the standard B Type.
Set the Dolby NR according to the Dolby NR used
when recording each cassette tape.
stop
Dolby NR
rev.mode
fwd
rev
stop
\
\
pause
rev.mode
Dolby NR
B-type
C-type
