35
Chapter 5
Rack Mounting
This chapter describes two methods you can use to mount your Switch into a
chassis rack.
• Rack-mount brackets for use with a two-post rack (page 36).
• Sliding rails for use with a four-post rack (optional purchase).
Following are standard rack-mounting considerations that Bay Networks
recommends you follow:
• The maximum recommended ambient temperature is 40 degrees
Centigrade. Additionally, make sure the internal temperature of the
rack does not exceed 40 degrees.
• Do not block the power supply vents or otherwise restrict airflow
when installing the Switch into a rack.
• Make sure that your rack is properly stabilized so that it will not tip
over under the weight of the Switch and other devices.
• Make sure that the electrical branch circuits are capable of handling
the Switch and other units in the rack before installing and
powering up the Switch.
• Ensure that a reliable Earthing path is maintained in the rack
system. The Switch is intended to be connected to an Earth ground.
