October 2002 2-1
2 Using the System
This chapter explains how to use the KODAK PROFESSIONAL RP 50 LED
Printer and Processor for daily operations. It takes you from startup to shutdown.
Topics include:
Starting up the Processor ..................................................................................2-1
Starting up the Printer ........................................................................................2-2
Calibrating the Printer ........................................................................................2-3
Obtaining Densities .....................................................................................2-6
Completing the Calibration ..........................................................................2-7
Making Prints .....................................................................................................2-9
Shutting Down the Processor ..........................................................................2-10
Shutting Down the Printer ................................................................................2-11
Starting up the Processor
1. Check that the circuit breaker switch for the processor is turned on.
2. Press On/Off on the processor’s Operator Control Panel to turn the processor
on.
The light above the On/Off key indicates the processor state. A blinking light
indicates that the processor is on but the chemicals are not yet at the correct
working temperature. A continuous light indicates that the processor is ready.
circuit breaker
switch
