3-8 A-61097 May 1997
Image Address Field Widths
This mode defines the Image Address field widths.
Refer to Description 4: Image Address Fields for a description of proper
field definitions.
■ Microimager 70 ■ Microimager 70/AFM ■ Scanner 900
■ Scanner 923 ■ Scanner/Microimager 990 ■ Scanner 9500
When using a Microimager 70 without the Advanced Function Module
installed, only the Image Address field widths for Mode 8 and Mode 9 may
be defined; the field widths are predefined and unalterable in Mode 1
through Mode 7. The predefined values are:
• Mode 1 – Fixed Field (6)
Field C – Level 3 (0)
Field B – Level 2 (0)
Field A – Level 1 (6)
• Mode 2 – Fixed Field (6)
Field C – Level 3 (0)
Field B – Level 2 (6)
Field A – Level 1 (0)
• Mode 3 – Fixed Field (6)
Field C – Level 3 (0)
Field B – Level 2 (3)
Field A – Level 1 (3)
• Mode 4 – Fixed Field (6)
Field C – Level 3 (3)
Field B – Level 2 (3)
Field A – Level 1 (0)
• Mode 5 – Fixed Field (4)
Field C – Level 3 (2)
Field B – Level 2 (3)
Field A – Level 1 (3)
• Mode 6 – Fixed Field (6)
Field C – Level 3 (0)
Field B – Level 2 (4)
Field A – Level 1 (2)
• Mode 7 – Fixed Field (6)
Field C – Level 3 (0)
Field B – Level 2 (6)
Field A – Level 1 (0)
When using a Microimager with the Advanced Function Module installed,
Scanner 900, Scanner 923, Scanner 9500, or Scanner/Microimager 990,
the Image Address Field widths for all modes may be defined.
NOTE: A field width definition for all fields (Field A – Level 1, Field B –
Level 2, Field C – Level 3, and Fixed Field ) must be specified.
