A SERVICE OF

logo

A-61121 May 1999 21
Replacing the
maintenance tray
Periodically the Super12 Document Printer maintenance tray may need
to be replaced.
To access and replace the maintenance tray:
1. Open the front cover of the scanner.
2. Place the printer on the hanger bracket so it is out of the way.
CAUTION: Hot surface, avoid contact.
NOTE: Be sure the flex cable is placed between the two hooks so it
does not get damaged.
3. Lift and lock the transport plate into place.
4. Lift and remove the belt module and place it aside.
Hanger bracket
Belt module
Transport plate