- 4 -
Lervia KH 4404
A safe approach:
• Place the appliance in the immediate
vicinity of an electrical power socket.
Ensure that the appliance and the
power plug are easily accessible,
particularly in an emergency.
• Never overburden the appliance. The
Shredder is designed for short period
of operation. Continuous operation:
maximum 3 minutes.
• In cases of danger, immediately remove
the electrical plug from the socket.
• Never use the shredder for tasks for
which it was not designed.
• Always be attentive! Always pay at-
tention to what you are doing and
act rationally. Never use the appliance
when you are distracted or don’t feel
well.
Description of the appliance
ቢ Cutter head
ባ Waste collector
ቤ Viewing window
ብ Cutter opening (Paper & Credit cards)
ቦ Switch
ቧ Cutter opening (CD)
Initial operation
• Place the cutter head ቢ on the waste
collector ባ so that the power cable is
located at the rear of the appliance.
• Connect the paper shredder to a
wall socket.
Operation
Switching the appliance on:
• Place the switch ቦ in the position
(ON/AUTO) for shredding.
Inserting paper:
• Feed paper into the cutter opening
ብ in panel format from above.
The motor starts automatically and also
switches off automatically if no further
paper is inserted. You can shred up to
5 sheets (80g/m
2
paper) at the same time.
Inserting credit cards:
• Insert the credit card into the middle
of the cutter opening ብ from above.
You can only shred one credit card at
a time.
Inserting a CD:
• Insert the CD into the cutter opening
(CD) ቧ from above. You can only shred
one CD at a time.
Clearing a material blockage:
• Push the switch ቦ into the position
(REVERSE) should the material
become jammed.
Reverse running is now engaged and
the item to be shredded will be ejected.
Switching the appliance off:
• To switch off the machine, push the
switch ቦ into the middle position
(OFF).
