A SERVICE OF

logo

10 WP-121 - Installing and Connecting the WP-121
5.2 Wiring the 9-Pin Terminal Block Line Output Connector
The 9-pin terminal block is a plug-in connector for attaching the STP cable. Follow
the colors of the color-coded sticker on these terminals for proper connection of
the cable.
Figure 7 defines the pinouts for the terminal block.
Figure 7: Terminal Block Pinouts
Notes:
Use the connector clips only when removing wires, not when inserting them
Each wire should protrude 9mm (0.35") from the plastic insulation so that it
can be easily connected. To prevent the wires crossing, be sure that each
wire is fully inserted