A SERVICE OF

logo

7
English
Installing the Base and the Printer
The printer is mounted on the upper deck of the base. See figure below.
1. Place the base onto a firm, sturdy table or desk.
The table or desk must be larger than the base.
2. Align the positioning pins on the top of the base with the holes
in the base of the printer, then slowly and carefully lower the
printer onto the base. You can easily set the printer on the
base by aligning the back edge of the printer with the end of
the base. Make sure that the connector on the base fits
squarely into the corresponding connector in the base of the
printer. See figure below.
Printer
Positioning Pins
Lower Deck for
the Feeder
Base
Connector
Upper Deck
pf8-Eng.pm6 12/19/00, 8:21 PM7