A SERVICE OF

logo

10
10.8 Administrator Settings
10-50
Utility Mode Operations Chapter 10
Setting the Reprint Function
This function is used to specify whether or not the last job printed can be recalled
and printed again. (The default setting is Yes.)
Reference
For details on the memory recall feature, refer to Reprint Screen on page 8-23.
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
Touch [Enter].
4 Touch [Admin. Set.].
5 Touch [3/4].
6 Touch [Reprint].
7 Touch the key for the
desired setting.
8 Touch [Enter].
9 Touch [Exit], in the next
three screens that
appear.
The Basic screen
appears again.