5
5-21
Sending Functions
FTP Encrypted TX
This allows you to encrypt documents when you send them. If you select [On] in this option, you can then select the
encryption method in the basic send screen.
Use the procedure below to scan and send originals as encrypted files.
1 Press the Send key.
2 Place the originals in the document processor or on the
platen.
3 Press the Function Menu key. Function Menu appears.
4 Press the or key to select [FTP Encrypted TX].
5 Press the OK key. FTP Encrypted TX appears.
6 Press the or key to select [On] and then press the
OK key.
Completed. is displayed and the screen returns to the
basic screen for sending.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
NOTE: Click Security Settings -> Network Security in the
Command Center RX. Be sure that SSL of Secure Protocol
Settings is On and more than two effective encryptions are
selected in Clientside Settings. For details, refer to the
Command Center RX User Guide.
Function Menu:
a
b
*********************
2
Original Size
T
3
Original Image
T
[ Exit ]
1
Color Selection
T
FTP Encrypted TX:
a
b
*********************
2
On
1
*Off
