27
Operation
RGB-PC Menu Options
RGB-PC Menu Options
RGB-PC
DE F G
Â
MENU EXIT
H-Position 50
V-Position 50
Clock 50
Phase 10
Auto configure
RGB-PC
DE F G Â
MENU EXIT
H-Position 50
V-Position 50
Clock 50
Phase 10
Auto configure
Phase / Clock
Phase / Clock
Adjustments
Adjustments
Auto Config.
Auto Config.
Adjustment
Adjustment
- Automatically adjusts picture position and minimizes image shaking.
- If the image is still not correct, your TV is functioning properly but needs further adjustment.
1. Press the menu button and then use
D / E
button to select the RGB-PC menu.
2. Press the G button and then use
D / E
button to select Auto configure.
3. Press the
G button to run Auto configure.
• If the position of the image is still not correct, try Auto adjustment again.
4. If picture needs to be adjusted more after Auto adjustment in RGB-PC mode, you can
adjust the
Clock
/
Phase.
1. Press the menu button and then use
D / E
button to select the RGB-PC menu.
2. Press the G button and then use
D / E
button to select H-Position / V-Position.
3. Press the F / G button to make adjustments.
• The adjustment range is 0 ~ 100.
4. Press the exit button to save and return to TV viewing.
Horizontal / V
Horizontal / V
ertical Position
ertical Position
Adjustments
Adjustments
- Be sure to select the RGB-PC source before operation.
- If the picture isn’t clear after auto adjustment and especially if characters are still jittery, adjust the picture Phase
manually.
1. Press the menu button and then use
D / E
button to select the RGB-PC menu.
2. Press the
G button and then use
D / E
button to select Clock or Phase.
4. Use the
F / G button to make appropriate adjustments.
• The Clock adjustment range is 0 ~ 100.
• The Phase adjustment range is 0 ~ 31.
• Based on the input mode, the adjustment range for Clock
/
Phase may change.
4. Press the exit button to save and return to TV viewing.
RGB-PC
DE F G Â
MENU EXIT
H-Position 50
V-Position 50
Clock 50
Phase 10
Auto configure
