114A2910B-GB
11-GB
Install the Protector System™
(See accessories)
Install this accessory for all installations on
Canopy doors, One-Piece Door with Horizontal
and Vertical Track , doors over 2.5m and when the
closing force as measured on the bottom of the
door is over 400N (40kg).
After opener has been installed and adjusted, The
Protector System™ accessory can be installed.
Instructions are included with this accessory.
The Protector System™ provides an additional
measure of safety against a small child being
caught under a garage door.
It uses an invisible beam which, when broken by an
obstruction, causes a closing door to open and
prevents an open door from closing and is strongly
recommended for homeowners with young children.
Note: The opener will automatically detect the
protector system when it is installed. The opener will
not close unless the sensors are aligned.
29
Special Features
1. Door within a door connection
Locate auxiliary quick connect terminals. Insert
bell wire into quick connect terminals 1 and 2.
2. Flashing light connection
The flashing light can be installed anywhere.
Connect light leads to quick connect terminals 1
and 2. Terminal 2 is ground.
30
Accessories
(1) Model 94330E Single-Function Remote Control
(2) Model 94333E 3-Function Remote Control
(3) Model 94335E 3-Function Mini Remote Control
(4) Model 9747E Keyless Entry System
(5) Model 78LM Multi-Function Door Control
Panel
(6) Model 75E Lighted Door Control Button
(7) Model 98LM Motion Detector Wall Control
(8) Model 760E Outside Keylock
(9) Model 1702E Outside Quick Release
(10) Model 770E The Protector System™
(11) Model FLA230 Flashing Light Kit
(12) Model 1703E The Chamberlain Arm™
(13) Model 16200LM Door in Door Switch
(14) Model MDL100LM Mechanical Door Latch Kit
(15) Model EQLI01 Door Handle Quick Release
(16) Model 9-13-1 Door Reinforcement Bracket
WIRING INSTRUCTIONS FOR ACCESSORIES
Outside Keylock – To opener terminals:
Red-1 and White-2
Protector System™ – To opener terminals:
White-3 and Grey-4
Door Control Panel – To opener terminals:
Red-1 and White-2
