Bluetooth 13
E-EQ-VX3XRG-G VX3X Reference Guide
Bluetooth
Access: Start | Settings | Control Panel | Bluetooth or Bluetooth icon in
taskbar or Bluetooth icon on desktop
or
Tap the Bluetooth icon in the taskbar to open the Bluetooth LXEZ Pairing
application.
The VX3X default Bluetooth setting is Enabled.
The LXE VX3X Bluetooth
®
module is designed to Discover and pair with nearby LXE Bluetooth
devices. Only LXE printers or scanners are recognized and displayed in the Bluetooth panel. All
other Bluetooth devices are ignored.
Prerequisite The Bluetooth devices (printers and/or scanners) have been setup to allow them
to be “Discovered” and “Connected/Paired”. The SysAdmin is familiar with the
pairing function of the Bluetooth devices.
Figure 1-4 Bluetooth Devices Display – Before Discovering Devices
Initial Use
1. Select Start | Settings | Control Panel | Bluetooth or tap the Bluetooth icon in the taskbar or
on the desktop.
2. Tap the Settings Tab.
3. Change the Computer Friendly Name at the bottom of the Settings display. The Bluetooth
VX3X default name is determined by the LXE factory installed software version. LXE
strongly urges assigning every VX3X a unique name (up to 32 characters) before Bluetooth
Discovery is initiated.
4. Check or uncheck the VX3X Bluetooth options on the Settings tab.
5. Tap the OK button to save your changes or the X button to discard any changes.
See Also: Chapter 3 – System Configuration, section titled Bluetooth.
