100 Summit Radio
RX2 Reference Guide E-EQ-RX2RG-B
Status Tab
Figure 5-5 SCU – Status Tab
This screen provides information on the radio:
• The config profile being used
• The client name, IP address and MAC address
• The status of the radio card (down, associated, authenticated, etc.)
• The name, IP address and MAC address of the Access Point (AP) maintaining the
connection to the network
• Signal strength (changes with network activity)
• Channel currently being used for wireless traffic
• Current transmit power in mW
• Bit rate in Mbit.
There are no user entries on this screen.
Note: After completing radio configuration, it is a good idea to review this screen to verify the
radio has associated (no encryption, WEP) or authenticated (LEAP, WPA), as indicated
above.
