.
A
Rod antennas for Bluetooth/wireless LAN
Stand this antenna upright when connecting to a network via wireless
LAN, or when connecting to a handheld device via Bluetooth.
(v p. 53)
.
The antenna clip can be removed from the rear panel.
A
Rotate the antenna clip 90 degrees to the left.
B
Pull the antenna clip out towards yourself.
0
The antenna clip is needed when transporting this unit. Keep it in a safe place.
0
Attach the antenna clip by following the steps for removing it in reverse.
B
Analog audio connectors (AUDIO)
Used to connect devices equipped with analog audio connectors.
(v
p. 44, 45)
C
FLASHER IN jack
Used when using a control BOX or other such control devices to control
this unit.
D
NETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN
network. (v p. 52)
E
PRE OUT connectors
Used to connect a subwoofer with built-in amplifier or power amplifier
for ZONE2. (v
p. 29, 142)
F
Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
(v
p. 41, 45)
Contents
Connections Playback Settings Tips Appendix
19
Front panel Display Rear panel Remote Index
