Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey
®
Setup.
0
If you change the speaker settings after performing Audyssey
®
Setup,
you will no longer be able to select Audyssey MultEQ
®
XT, Audyssey
Dynamic EQ
®
or Audyssey Dynamic Volume
®
. (v p. 158 – 159)
0
This unit can be used without changing “Manual Setup” settings. Please
set if necessary.
Amp Assign
Select power amplifier usage method to match your speaker system.
See “Speaker configuration and “Amp Assign” settings” (v p. 34)
regarding the speaker configuration and connection.
o
Assign Mode
Select how to use the power amp.
Main Only
(Default):
Setting for 7.1-channel playback using
surround back, front height or front wide
speakers.
ZONE2:
Setting to assign the unit’s built-in power
amplifier for ZONE2 and output the audio
in stereo.
Bi-Amp:
Setting to use the front speakers via the
bi-amp connection.
Front B:
Setting for playback using a second front
speaker. You can switch the playback
between front speaker A and B according
to your liking. Switch the front speaker
using “Front Speaker” in the menu.
(v p. 196)
o
Main Speakers
Select the speakers used in MAIN ZONE.
Front Height
(Default):
Select when the front height speakers are
connected.
Front Wide:
Select when the front wide speakers are
connected.
Contents Connections Playback Settings Tips Appendix
189
Front panel Display Rear panel Remote Index
