a 2 recirculation vents
(recirculation mode only)
b 2 protective shields
prevent scratches to the chimney dur
-
ing installation.
c 1 diverter
(recirculation mode only)
d 1 flex hose for connecting the di
-
verter to the exhaust connection.
e 2 hose clips for securing the
ducting.
f 1 reducing collar
for use with 5" (125 mm) exhaust
ducting.
g 1 non-return flap for vented air
extraction only.
h Upper retaining plate secures the
chimney extension.
i Middle retaining plate for addi-
tional stability of the chimney.
j Lower retaining plate secures the
canopy and motor assembly.
k 2 support angles to secure the
active charcoal filter in recirculation
mode.
Caution: During the installation pro
-
cess, please be careful of sharp
edges that can cause harm.
8 large headed screws 5 x 40 mm
for securing the retaining plates and the
canopy.
(S8 wall anchors included in the pack
-
aging are not for use in USA / CDN.)
2 M 6 locking nuts for securing the
motor assembly.
2 screws 3.9 x 7.5 mm for securing the
chimney.
1 allen wrench
for adjusting the unit height
1 lever for dismantling the chimney
Installation instruction sheet
Installation accessories
27
