aCover plate
bTelescopic tower
cCanopy
The canopy is not designed to be
used as a shelf.
dGrease filters
eCharcoal filter
Available as an optional accessory for
recirculation mode (DA 420 V only)
fRecirculation grille
(only for recirculation mode on the DA
420 V)
gControls
hHob lighting
iTouch control for hob lighting
This control switches the lighting on
and off, and is also a dimmer switch.
jOn/Off touch control for the fan
kControls to select the fan power
level
lTouch control for the run-on option
The fan can be set to switch off
automatically after either 5 or 15
minutes.
mTouch control for the grease filters
The indicator lamp for the grease filter
touch control lights up when the grease
filters need to be cleaned.
This control is used to reset the
operating hours counter after cleaning
the grease filters (see "Cleaning and
care").
It can also be used to check and alter
the operating hours counter.
nTouch control for the charcoal filter
(DA 420 V only)
The indicator lamp for the charcoal filter
touch control lights up when the
charcoal filter used in recirculation
mode needs to be replaced. For this to
happen, the operating hours counter
needs to be set before the appliance is
used for the first time.
This control is used to reset the
operating hours counter after replacing
the charcoal filter (see "Cleaning and
care").
It can also be used to check and alter
the operating hours counter.
oControl for raising and lowering
the canopy
The height of the canopy can be
adjusted by up to 300 mm in air
extraction mode, and by up to 250 mm
in recirculation mode.
For further details about the functions
of the appliance, see "Use".
Guide to the appliance
11
