Preparing the electrical connection
^
Remove the cover of the terminal box.
^ Decide whether you would like the
power cable to enter the ventilation
system from below or from the rear.
Remove the respective knock-out.
^
If the system is connected to an external
blower, remove the knock-out for the
control cable.
^
Install a suitable UL listed cable clamp
or conduit fitting (not included) in the
knock-out.
^
With the assistance of at least one other
person, lift the ventilation system into the
prepared cutout. The top mounting
angles should rest on the countertop.
^
Align the ventilation system.
^
Secure the appliance to the floor and
the countertop.
Installation
32
