6.5 When the Message “Staple mode cannot be used.” Appears
6
CF2002/CF3102 6-47
Touch Panel Messages Chapter 6
6
Turn misfeed-clearing dial
clockwise until the removal
indicator is completely blue.
❍
If the dial is turned too far, turn
it counterclockwise to adjust it.
✎
Note
If the message “Staple mode
cannot be used.” appears, be
sure to perform these steps. If
the paper is pulled out with too
much force without performing
these steps, the finisher may be damaged.
7
Pull out any paper fed into the
output tray.
8
Open the transport guide, and
then pull out any paper in the
transport section.
✎
Note
If the paper cannot easily be
pulled out, stop trying to pull it
out. Pulling out the paper with
too much force may damage
the folding unit.
If the paper cannot be pulled
out easily, turn the misfeed-clearing dial in the folding section as described
in the following step, and then pull out the paper.
