74
Parameter list
Differ according to capacities. (55K or lower/75K or higher)
Differs according to the voltage class. (200V class/400V class)
Parameters which can be set when the plug-in option (FR-A7NC) is mounted.
The setting is applied after converter reset or at the next power-ON.
"L.ERR" LED on FR-A7NC flickers when a setting is changed. If the converter is reset, the setting is applied and LED turns off.
The parameter number in parentheses is the one for use with the parameter unit (FR-PU07).
56 Current monitoring reference
0 to 500A/0 to 3600A
0.01A/
0.1A
Rated
current
84
57 Restart selection 0, 9999 1 9999 89
58 Free parameter 1 0 to 9999 1 9999 90
59 Free parameter 2 0 to 9999 1 9999 90
61 Key lock operation selection 0, 10 1 0 90
65 Retry selection 0, 1, 2, 3, 4 1 0 91
67 Number of retries at fault occurrence 0 to 10, 101 to 110 1 0 91
68 Retry waiting time 0.1 to 360s 0.1s 1s 91
69 Retry count display erase 0 1 0 91
75
Reset selection/disconnected PU detection/
PU stop selection
0 to 3, 14 to 17 1 14 92
77 Parameter write selection 1, 2 1 2 94
80 Voltage control proportional gain 0 to 1000% 1% 100% 79
81 Voltage control integral gain 0 to 1000% 1% 100% 79
82 Current control proportional gain 0 to 200% 1% 100% 95
83 Current control integral gain 0 to 200% 1% 100% 95
117 PU communication station number 0 to 31 1 0 97
118 PU communication speed 48, 96, 192, 384 1 192 97
119 PU communication stop bit length 0, 1, 10, 11 1 1 97
120 PU communication parity check 0, 1, 2 1 2 97
121 Number of PU communication retries 0 to 10, 9999 1 1 97
123 PU communication waiting time setting 0 to 150ms, 9999 1ms 9999 97
124 PU communication CR/LF selection 0, 1, 2 1 1 97
145 PU display language selection 0 to 7 1 0 117
168
Parameter for manufacturer setting. Do not set.
169
269
342 Communication EEPROM write selection 0, 1 1 0 116
500 Communication error execution waiting time 0 to 999.8s 0.1s 0s 115
501
Communication error occurrence count
display
0 1 0 115
502 Stop mode selection at communication error 0, 3 1 0 115
542 ,, Communication station number (CC-Link) 1 to 64 1 1 109
543 ,, Baud rate (CC-Link) 0 to 4 1 0 109
544 , CC-Link extended setting 0, 1, 12 1 0 109
C0(900) FM terminal calibration 118
C1(901) AM terminal calibration 118
989 Parameter copy alarm release
10/100
1 10/100 121
990 PU buzzer control 0, 1 1 1 117
991 PU contrast adjustment 0 to 63 1 58 117
Pr. CL Parameter clear 0, 1 1 0 120
ALLC All parameter clear 0, 1 1 0 120
Er.CL Fault history clear 0, 1 1 0 134
PCPY Parameter copy 0, 1, 2, 3 1 0 121
Parameter
Name Range
Increments
Initial
value
Refer to
page
Customer
setting
HC2.book 74 ページ ２０１２年１１月１９日 月曜日 午前１０時５２分
