A SERVICE OF

logo

60
Operation Procedures for Functions
3.2.2 Selection of PU operation (direct input)
You can select the PU operation mode to set PU operation frequency.
1
Press .
The function menu is called.
2
Using , move the cursor
to "2 PU Oper".
3
Press .
The menu on the right
appears.
4
Make sure that the cursor
is located at "1 PU:
Directly".
If not, move the cursor with
/ .
5
Press .
The PU operation mode is
selected and the frequency
setting screen appears.
2 PU Oper
3 Pr.List
1 MONITOR
4 Pr.Clear
2 PU Oper
3 Pr.List
1 MONITOR
4 Pr.Clear
2 JOG:Jogging
1 PU:Directly
SET 0.00Hz
Freq Set
0~400Hz
6
Enter the set frequency
using to and press
.
The frequency setting is
complete.
7
Press / to perform
forward or reverse rotation
with the set frequency.
REMARKS
ยท Press to call the frequency setting screen any
time.
SET 60.00Hz
60.00Hz
Freq Set
Completed
60.00Hz
STF FWD PU
READ
:
List