Indicator setting
The brightness of indicator lamps can be changed and turned off, when the screen is
displayed (Operation mode).
[Procedure]
(1) Select <Indicator> in the ScreenManager <Others> menu.
(2) If you desire to turn off the lamps, select "Off".
The following lamp are turned off.
● Custom / sRGB / EMU / CAL
● Adj. Lock
● Signal1 / Signal2
● ON
If you desire to change the brightness of the lamps, select "High" , "Medium" or
"Low". (Default setting is "Medium")
EIZO Logo Appearing Function
When turning on the monitor, the EIZO logo is displayed for a while. If you desire to
display or undisplay this logo, use this function. (Default is logo appearing.)
[To undisplay]
Turn off the monitor once, then touch the power switch while touching the Enter
switch, and this logo is not displayed.
[To display]
Turn off the monitor once, then touch the power switch while touching the Enter
switch, and this logo is displayed again.
