A SERVICE OF

logo

38 7. ATTACHING AN ARN STAND
3. Attach an arm stand to the LCD monitor securely.
Arm-stand
M4 Mounting Screws
:M4 x 16 (mm)
´ When attaching an arm stand, please refer to the users manual
of the arm stand and install the unit securely with the enclosed
screws.
Not doing so may cause the unit to come unattached, which may
result in injury or equipment damage. When the unit is dropped,
please ask your dealer for advice. Do not continue using a
damaged unit. Using a damaged unit may result in fire or electric
shock. When reattaching the tilt stand, please use the same
screws and tighten them securely.
WARNING
WARNING
For the Portrait display, rotate the monitor clockwise and use the software for the
portrait.