Default Settings
CAL Switch Mode 1-DICOM
Brightness Fixed at the factory
PowerManager DVI DMPM
Off Timer Disable
Menu Settings Menu Position Center
Menu Off Timer 45 sec
Language English
Signal Selection
*
Standard
Orientation* Portrait (HW)
*
These functions cannot be initialized with a reset function (p.19). For information about setting these
functions, refer to p. 16.
Optional
Panel Protector EIZO “RP-901”
Arm, Stand EIZO “LS-HM1-D” : Dual Height Adjustable Stand
EIZO “LA-131-D” : LCD Monitor Flexible Arm
EIZO “LA-030-W” : Wall Mount Arm for LCD Monitor
EIZO “LA-011-W” : Wall Mount Arm for LCD Monitor
Graphics board 8bit, 10bit and 12bit monochrome signals supported
• RealVision
“VREngine/SMD5-PCI”
8bit and 10bit monochrome signal supported
• Matrox “MED5mp-PPP”
8bit monochrome signal supported
• AMD “FireGL V7350”
Calibration Kit EIZO “RadiCS UX1” Ver.3.0.2 or later
EIZO “Clip-On Swing Sensor G1”
mm (inches)
English
