English
7. TROUBLESHOOTING 41
7. TROUBLESHOOTING
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.
z No picture problems → See No.1 ~ No.2
z Imaging problems → See No.3 ~ No.13
z Other problems → See No.14 ~ No.17
z USB problems → See No.18 ~ No.19
Problems Points to check with Possible Solutions
1. No picture
z Indicator status: Off
Check that the power cord is correctly connected.
If the problem persists, turn off the monitor power
for a few minutes, then turn it back on and try
again.
z Indicator status: Blue
z Indicator status: Yellow
Check the “Brightness” setting.
Switch the signal input by pressing the Input
Signal Selection Button on the front control panel.
Try pressing a key on the keyboard, or clicking
the mouse. (p. 35)
z Indicator status: Slowly
flashing Yellow
Try pressing the Power Button.
z Indicator status: Flashing
Yellow (twice for each)
Try turning the PC on.
