WAN and System Configuration 2-27
Exposed Addresses
You can specify the IP addresses you want to expose by selecting Add Exposed Address List and pressing
Return. The Add Exposed Address List screen appears.
Add, Edit, or delete exposed addresses options are active only if NAT is disabled on an WAN interface. The
hosts specified in exposed addresses will be allowed to receive inbound traffic even if there is no
corresponding outbound traffic.
• Start Address: Start IP Address of the exposed host range.
• End Address: End IP Address of the exposed host range
Add Exposed Address List
Exposed Address List Name: my_xposed_addr_list
Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.
Change Exposed Address Range ("my_xposed_list")
First Exposed Address: 192.168.1.10
Last Exposed Address: +-------------+
+-------------+
Protocol... | TCP and UDP |
| TCP |
Port Start: | UDP |
| ANY |
Port End: +-------------+
CHANGE EXPOSED ADDRESS RANGE CANCEL
