The front seats are warmed by built-in heaters.
The switches located on the center console can
be operated independently (driver side seat
k
A
and front passenger side seat k
B
) of each other.
1. Start the engine.
2. Select heat range.
k
1
For high heat, press the (High) side
of the switch.
k
2
For low heat, press the (Low) side
of the switch.
k
3
For no heat, the switch has a center OFF
position between low and high.
The indicator light in the switch
k
C
will
illuminate when low or high is selected.
The heater is controlled by a thermostat,
automatically turning the heater on and off.
The indicator light will remain on as long as
the switch is on.
3. When the vehicle’s interior is warmed, or
before you leave the vehicle, be sure to turn
the switch to the off position (center)
k
3
.
CAUTION
¼ The battery could be discharged if
the seat heater is operated while the
engine is not running.
¼ Do not use the seat heater for ex-
tended periods or when no one is
using the seat.
¼ Do not put anything on the seat
which insulates heat, such as a blan-
ket, cushion, seat cover, etc. Other-
wise, the seat may become over-
heated.
¼ Do not place anything hard or heavy
on the seat or pierce it with a pin or
similar object. This may result in
damage to the heater.
¼ Any liquid spilled on the heated seat
should be removed immediately with
a dry cloth.
¼ When cleaning the seat, never use
gasoline, thinner, or any similar ma-
terials.
¼ If any abnormalities are found or the
heated seat does not operate, turn
the switch off and have the system
checked by your NISSAN dealer.
SIC2056
HEATED SEATS (if so equipped)
2-26 Instruments and controls
੬ 04.4.5/Z50-D/V5.0 ੭
