53
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
“Base Unit Settings” (p. 53, 54, for KX-TG2700/KX-TG2720/KX-TG2730
users), “Telephone System Settings” (p. 54, 55), “Answering System Settings”
(p. 56-58, for KX-TG2730 users), and “Voice Mail Programming” (p. 59, 60, for
KX-TG2700/KX-TG2720 users) are programmed within the system.
•The displays will vary depending on which base unit model (KX-TG2700/
KX-TG2720/KX-TG2730/KX-TG2740) this handset is registered to.
Base Unit Settings (For KX-TG2700/KX-TG2720/KX-TG2730 Users)
Make sure the base unit and the handset are not being used.
Base unit incoming call tone
The system is preset to “2”.
1. Press (SNOOZE/ALARM).
•You can also press (CONF/FUNCTION) to directly
enter the function menu and go to step 3.
2. Within 5 seconds, press the soft key
().
3. Scroll to “Initial setting” by pressing Ö
or Ñ, and press á.
4. Scroll to “Set base unit” by pressing Öor
Ñ, and press á.
5. Press áat “Incoming call”.
6. Select the desired setting, “On”, “Off” or “2”,
by pressing Öor Ñ, and press the soft key
()
To turn the base unit Room Monitor feature on
(to allow the handset to monitor through the base unit)
1. Follow steps 1 to 4 of “Base unit incoming call tone” above.
2. Scroll to “Room monitor” by pressing Öor
Ñ, and press á.
3. Select “On” by pressing Öor Ñ, and press
the soft key ( ).
•
To prevent the base unit from being monitored,
select “Off” in step 3, and press the soft key ( ).
SAVE
SAVE
SAVE
FUNCTION
---------------
H
Incoming call
Room monitor
Other Programmable Settings
AUG.10
11
:
30AM
FUNCTION
ALARM
SAVE
Incoming call
Incomin
tone :2
GF
Copy directory
H
Initial setting
---------------
Incoming call
H
Room monitor
SAVE
Room monitor
000:On
GF
H
Set base unit
Registration
