Command Line Interface
A-13
6371-A2-GB20-10
August 2000
Show Command Outputs
show console
Displays: console enabled or console disabled
show system
Sample show system display:
May 21 09:53:26 2000
System ID: xxxxxxxx
Model #: xxxx, Serial #: xxxxxxxxxxxx, HW-Rev: xxx
Boot: FW-Version xxxxxxxx
2nd Stage Boot: FW-Version xxxxxxxx
Image 0: FW-Version xxxxxxxx, [active]
Image 1: FW-Version xxxxxxxx
DSP: FW-Version xxx
Selftest Result: [0xxxxx] (if failed) { pass | fail }
show config
Sample show config display:
syslog { enabled | disabled }
eth1 frame { DIX | 802.3 }
proxy ARP eth1 { enabled | disabled }
proxy ARP dsl1 { enabled | disabled }
NAT disabled or NAT enabled { basic NAT | NAPT }
DHCP server { enabled | disabled }
DHCP relay { enabled | disabled }
IP multicast { enabled | disabled }
IP processing { enabled | disabled }
1483 encapsulation { LLC | VC Muxing }
autologout { enabled | disabled }
