16
STEP 6: INSTALL THE WEIGHT STACK
1. Place the guide rods in the upright.
2. Install the weight stack base, rubber
bumpers, and washers.
3. Install the weight plates.
4. Install the cap plate and attach the
cable with the selector pin as shown.
5. Install the Guide rod hubs and
tighten the hardware.
1, 3
7
9
10
5
6
8
4
2, 3
ITEM PART NO.DESCRIPTION QTY.
1 C 449 SCREW, 3/8”-16 X 2-1/4” HHCS 2
2 C 766A LOCK NUT, 3/8” 2
3 C 754C FLAT WASHER, 3/8” 4
4 FS-GRD-200X ASSY, GUIDE ROD 2
5 FS-BMP-001 RUBBER BUMPER 2
6 FS-WSB-000 WEIGHT STACK BASE 2
7 FS-BKT-000 GUIDE ROD BRACKET 2
8 FS-SBR-000X CAP PLATE ASSY 1
9 WHT-PLATE WEIGHT PLATE 10# OR 15# 16
10 C 757A FLAT WASHER, 1” 2
