Parrot MKI9200 Manual

A SERVICE OF

next previous

5

Installing the kit

Note : If you have the possibility to use a multimeter, test and verify all connections on the vehicle

before connecting the Parrot MKi9200 wiring loom.

Car stereo with ISO connectors

1. Connect the male connectors of the hands-free kit to the car stereo.

2. Join the vehicle‟s audio and power supply cables to the female connectors of the Parrot

MKi9200.

3. On the installation cable, connect the free yellow wire to one of the audio system‟s

corresponding mute-in jacks if available (mute in 1, mute in 2 or mute in 3).

Note : Mute in 1, mute in 2 and mute in 3 are only suggested mute locations. You first have to test

and verify the mute on the vehicle.