Using Password Protection
The password protection feature prevents formats, graphics or
fonts from accidentally being deleted from the printer’s memory.
Enabling the Password (System Administrators only)
A System Administrator can enable the password that must be
entered before formats, graphics or fonts can be deleted.
1.
From the Main menu, press l or r until you see
MAIN MENU
l
Diagnostics
2.
Press Enter/Pause. You will see
Enter Password
_ _ _ _ _ _
3.
Enter the password: press Feed/Cut three times and then
press Enter/Pause.
If you enter the wrong password, you return to the Main menu.
4.
From the Diagnostics menu, press l or r until you see
DIAGNOSTICS
l
User Diag
5.
Press Enter/Pause. Then, press l or r until you see
USER DIAG
l
Password
6.
Press Enter/Pause. You will see
Enable Password?
l
No
10-4
Using Diagnostics
