Scanner Checkout
Customer Hand-off
4-3
2.
Demonstrate how to operate the scanner.
• Turn on the system.
• Load the input hopper.
• Run ScanTools Plus and select the appropriate application.
• Monitor the scanning process for operational messages.
• Stop the scanner/restart.
• Unload the select stacker/output hopper.
• Turn off the system.
3. Demonstrate the operation of other system components.
• Computer
• Printer
4. Correct errors using ScanTools Plus with sample application.
• Feed a form with timing mark in the wrong position.
• Create a mechanical error and correct it.
• Create a paper jam and correct it.
• Repair a damaged form.
5. Demonstrate periodic maintenance.
• Clean the upper transport bed.
• Clean the lower transport bed.
• Clean the outer turnaround.
• Clean the glass on the light source assembly.
• Clean/replace the scanner cooling fan filter.
• Remove/replace the pick belt.
• Remove/replace the sheet retard pad.
6. Demonstrate transport printer maintenance.
• Change the printer ribbon cartridge.
• Explain the one-time ribbon intensity adjustment.
7. Demonstrate bar code reader operation.
• Reader position adjustment
• Bar code reader problem solving
8. Demonstrate how to run the Quick Check Utility (See Quick Check Guide for the
OpScan iNSIGHT™ 70 Scanner).
9. Demonstrate how to run the Scanner Exerciser Utility (See Appendix C in the
Operator's Guide for the OpScan iNSIGHT™ 70 Scanner).
10. Identify system user manuals.
