English
21EN
8 Other features
Set the alarm timer
You can set two alarms which go off at different time.
1 Ensure that you have set the clock correctly. (see ‘Set clock and date’ on page 13 )
2 Press and hold ALM 1 or ALM 2 on the main unit for 2 seconds.
Hour digits blink.
[AL 1] (alarm 1) or [AL 2] (alarm 2) is displayed.
3 Press / repeatedly to set the hour.
4 Press ALM 1 or ALM 2 to confi rm.
5 Press / repeatedly to set the minute.
6 Press ALM 1 or ALM 2 to confi rm.
To set the other alarm, repeat the steps 2 - 6.
Tip
To view alarm time, press ALM 1 or ALM 2 repeatedly until alarm time is displayed.•
Set alarm mode
1 Adjust the iPhone/iPod-RADIO-BUZZER control on the main unit to select the
source for the alarm.
When the alarm time comes, the selected Phone/iPod, or radio or buzzer
turns on.
Tip
If iPod/iPhone source is selected but no iPod/iPhone is loaded, the buzzer is selected automatically.•
Activate the alarm timer
1 Press repeatedly ALM 1 or ALM 2 on the main unit to activate or deactivate the
timer.
If the timer is activated, [AL 1] (alarm 1) or [AL 2] (alarm 2) is displayed.
If the timer is deactivated, [AL 1] (alarm 1) or [AL 2] (alarm 2) disappears.
Turn off the alarm tone
During an alarm tone, you can select one of the following to turn it off.
»
»
•
»
»
»
DC350_12_Book 1.indd 21DC350_12_Book 1.indd 21 11/7/2008 2:05:26 PM11/7/2008 2:05:26 PM
