21
English
6 Press SLEEP/TIMER to confirm.
The minute digits begin to blink. »
7 Press / to set the minute.
The timer is set and activated. »
»
is displayed.
Activate and deactivate the alarm
timer
1 Switch the system to standby mode.
2 Press TIMER repeatedly to activate or
deactivate the timer.
If the timer is activated, »
is displayed.
If the timer is deactivated, »
disappears on the display.
Note
If DISC/USB/iPod source is selected and the track •
cannot be played, tuner is activated automatically.
Play from an external device
You can also listen to an external audio device
through this unit.
1 Press USB/MP3 LINK to select the MP3
link source.
2 Connect the supplied MP3 link cable to:
the • MP3 LINK jack (3.5mm) on the
unit.
the headphone jack on an external •
device.
3 Start to play the device (see the device
user manual).
8 Other features
Set the sleep timer
This system can switch to standby
automatically after a set period of time.
1 When the system is turned on, press
SLEEP repeatedly to select a set period of
time (in minutes).
When sleep timer is activated, »
is
displayed.
To deactivate sleep timer
1 Press SLEEP repeatedly until “OFF” is
displayed.
When sleep timer is deactivated, »
[SLEEP](sleep)
disappears on the
display.
Set the alarm timer
This unit can be used as an alarm clock. The
disc/radio/USB/iPod is activated to play at a
preset time.
Note
Ensure that you have set the clock correctly. •
1 Press to switch to standby mode.
2 Press and hold SLEEP/TIMER for more
than two seconds.
A prompt to select the source is »
displayed.
3 Press CD, iPod, TUNER, DAB, or USB to
select a source.
4 Press SLEEP/TIMER to confirm.
The clock digits are displayed. »
The hour digits begin to blink. »
5 Press / to set the hour.
EN
