4 EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
This docking speaker can be powered by either
AC power or batteries.
Option 1: AC power
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the back
of the unit.
• Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Connect the AC power adapter to:
• the power socket at the back of the
docking speaker.
• the wall socket.
Option 2: Battery power
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
• Remove batteries if they are exhausted or will not be
used for a long time.
• Batteries contain chemical substances, so they should
be disposed of properly.
1 Open the battery compartment.
2 Insert 4 x 1.5V AA batteries with correct
polarity(+/-)asindicated.
3 Close the battery compartment.
Turn on
Switch the power button to ON position to
turn on the docking speaker.
» The LED indicator lights up.
Switch to standby mode
The docking speaker switches to economic
standby mode in the following situation:
• The speaker is idle for 15 minutes
when powered by AC supply;
• The iPod/iPhone or external audio
device is disconnected when the
speaker is operated on batteries.
» The LED indicator lights off.
PUSH
