9EN
3 First-time setup
, do the following setup:
In , select the menu language on ;
In [Wireless], connect to your home network through Wi-Fi.
On the remote control, press
.
» You enter the Home screen.
From the Home screen, go to
[Setup].
Connect to a wireless router (Access Point). You can connect
to the network that is built around the router.
directly and no dial-up is required on the computer.
1 to power, select [Wireless] on the
» A pop-up screen is displayed for you to select connection options.
2 On the pop-up screen, select [Scan Wi-Fi (Recommended)].
»
on the remote control.
3 Select your network.
4 Select your connection option: , PBC, or [Standard].
» A message is displayed when the connection is complete.
Initial Setup
WWW
HDMI
Menu Language
Wireless
