1
Tuning Radio Stations
1
Press Power
yy
(or STANDBY-ON
yy
on the front of the DVD
Receiver) to turn on the last selected sound source.
2
Press TUNER•BAND on the DVD Receiver(or press the
SOURCE dial on the remote) to select TUNER mode.
3
Press TUNER•BAND again to select FM or AM.
4
Press and hold H or G until the frequency indicator (station
number) starts to change, then release. The next radio station will
tune automatically.
5
To tune to a weak station, press H or G briefly and
repeatedly until the best possible reception is found.
Programming Radio Stations
You can preset up to 40 stations in memory.
1
Tune to the desired radio station as detailed above.
2
Press SLOW/MEM on the remote. “PROG” will appear on the
display panel.
3
Within five seconds, press the Number buttons (0-9) to
select a preset number.
● If “Program” disappears from the display panel before you select
a preset number, repeat steps 2-3.
4
Within five seconds, press SLOW/MEM to store the radio sta-
tion. Repeat steps 1–4 to store other radio stations.
● If you try to program more than 40 preset radio stations, "FULL"
will appear on the display panel.
Selecting Preset Radio Stations
1
In Tuner mode, press h or g or use the Number but-
tons to select a preset station number. The preset station number,
radio frequency, and FM or AM will appear on the display panel.
