SETTING THE T
IMER’S ACTIVATE CONTROL
A
fter you have set the TIME, START
TIME, STOP TIME, and CHANNEL,
you must activate the Timer for it to operate.
Your options are to set the Timer to work
ONCE or DAILY. Set ACTIVATE to OFF if
you don’t want to use the Timer.
1
Press the MENU/SELECT button
on the remote control to show the
on-screen menu.
2
Press the CURSOR RING DOWN
twice to highlight FEATURES.
3
Press the CURSOR RING RIGHT
to enter the FEATURES submenu.
4
Press the CURSOR RING RIGHT
again. Then press the CURSOR
RING DOWN repeatedly until the
ACTIVATE control is highlighted.
5
Press the CURSOR RING RIGHT
to cycle through the options and
make your selection. The options are
ONCE, DAILY, or OFF.
6
Press the STATUS/EXIT button to
exit the menu.
Using the On-screen Submenus: Features
• Changing the channel or adjusting the
volume during the last minute of a Timer
setting will cancel the shutting off of the
TV.
• Thirty seconds before the set changes to
the channel you set (see page 42), an
announcement appears on screen.
HELPFUL HINT
