A SERVICE OF

logo

Open as PDF
next previous
15
EN
Troubleshooting
How do I reset my player?
Insert a pen tip or other sharp object into the reset hole located at
the bottom of the player. Hold until the player shuts down.
If none of the above works, then you may have to use the
Device Manager to recover your player:
Launch the 1 Philips Device Manager at Start > Programs >
Philips Digital Audio Player > SA29XX > Philips SA29XX
Device Manager on your PC.
Press and hold the 2 OPTIONS button while your player is
connecting to the PC.
Keep holding the key until the 3 Philips Device Manager
acknowledges your player and goes into recovery mode.
Click the 4 Repair button and follow the instructions given by the
Device Manager.
After the player has been repaired, disconnect it from your PC 5
and re-start.