3.
3.Press .
'Pro' will briefly appear in
the video recorder display.
After 2 seconds, default
program number will
appear in the display. Set
the desired program num-
ber using
.
4.
4.Press .
The program number you have just set will be
displayed.
5.
5.Insert a cassette with an intact security tab
(unprotected).
6.
6.Switch off with
.
The programmed recording will only function
when the video recorder is switched off with
.
How to check, or delete a pro-
grammed recording (TIMER)
1.
1.Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.Press .The main menu will appear.
3.
3.Select 'TIMER' with or .
Then press .
4.
4.Select 'TIMER LIST' with or ,
and confirm with
.
5.
5.Select timer block with .
6.
6.To cancel the recording, press .
7.
7.To end, press
.
8.
8.Switch off with
.
How to change a programmed
recording (TIMER)
1.
1.Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.Press .The main menu will appear.
3.
3.Select 'TIMER' with or .
Then press .
4.
4.Select ONCE, DAILY or WEEKLY recording
with or .Then press
.
5.
5.Select a TIMER block with . (The flashing
number indicates an empty TIMER block.)
6.
6.Press
to delete information and input
correct information with
.
7.
7.To end, press
.
8.
8.Switch off with
.
Problems and solutions for pro-
grammed recordings
STANDBY/ON
yy
STATUS/EXIT
0..9
CLEAR
0..9
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
MENU
STANDBY/ON
yy
STATUS/EXIT
CLEAR
FWD 1- B
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
MENU
STANDBY/ON
yy
STANDBY/ON
yy
TURBO TIMER
STOP C-L
PLAY B-K
TURBO TIMER
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
SELECT KL CHOOSE B
ONCE
DAILY
WEEKLY
→TIMER LIST
END=EXIT
12
Timer block disappeared when I pressed
.
You have checked all the programmed record-
ings. If you want to check them again, repeat
steps 2 to 5.
FWD 1- B
Error message: 'Err'
• If this error message appears after pressing
, the start time or end time is
same as another recording.
TURBO TIMER
Error message: ' ' flashes in the video
recorder display
•
No cassette was inserted. Insert a cassette and
switch off the video recorder using
.
Cassette was ejected as soon as the
button was pressed
• A cassette without the security tab was inserted.
Undo the erase protection (chapter 'Manual
recording', section 'Preventing accidental eras-
ing') or insert a different cassette.
'TURN OFF VCR FOR TIMER RECORDING'
flashes on the TV screen
• The video recorder is switched on several min-
utes before the start of a programmed recording.
Switch off the video recorder with
. A programmed recording (timer)
will only function when the video recorder is
switched off.
Cassette is ejected during recording
•
The end of the tape was reached during recording.
The video recorder does not react
• While a programmed recording is being made,
you cannot operate your video recorder manu-
ally. If you want to cancel the programmed
recording, press on the front panel.
STOP/EJECT
STANDBY/ON
yy
STANDBY/ON
yy
STANDBY/ON
yy
PWR.
PWR.
PWR.
EN
HG474ED(EN).qx3 03.12.22 9:58 PM Page 12
