Changing Cycling Computer Battery
1. Open the batterycover by turning it counter clockwise
45 degrees (picture 1).
2. Removethe battery cover by lifting it carefully. The
battery is attached to the cover. Remove the battery. Be
careful not to damage the threads of the back cover and
metal spring inside the battery cover.
3. Placea new battery with the positive (+) side against
the cover and negative (-) side toward the cycling
computer (picture 2).
4. Thesealing D -ring of the battery cover is attached to
the back cover. Replace the sealing D -ring if it is
damaged. Before closing the battery cover, make sure
that the sealing ring is undamaged and is placed
correctly in its groove. Ensure that the flat surface of
the sealing D –ring is against the back cover. Otherwise
sealing D –ring might damage when you close the
battery cover.
5. Putthe battery cover in its place and close it by turning
the cover clockwise (picture 3). Make sure that the
cover is closed properly!
ENGLISH
22 Important Information
